STATE A6R kishi model

    Specially Tuned System for the Ultimate ‘STATE’

    The STATE A6R kishi model is a specially tuned system of multi-processing DACs that allows for creating a high-quality digital multi-system with up to 3-way and 6 channels per device. It also features the capability for joint use of up to 10 devices, including master devices, using the master/slave function through the proprietary inter-device communication format ML Link. This model is based on the existing STATE A6R and has implemented significant changes and fine tuning of components related to sound quality with the aim of creating the ultimate ‘STATE’ product. We made this commercial product with the same sound quality and settings as was selected to be the best from the prototypes by our technical executive, Hiroshi Kishikawa. In addition, the audio adjustment software uses a special version customized specifically for the kishi model. Both the equalizer center frequency and crossover frequency can be selected from any of 254 specific points (35 points in the original version)—allowing for exceptionally detailed sound tuning to maximize the qualities of this unit. The exterior has been specially designed with a sunrise-red clear glossy finish and gold lettering.

    • STATE A6R kishi model

    STATE A6R kishi model[ Multiprocessing DAC System ]

    Multiprocessing DAC System

    STATE A6R kishi model

    Production run limited to 50 units

    DSP/Pre Amplifier Equalizer Select 15 points from 254 points / Adjustable at -0.1dB steps (-12dB maximum)
    Left / Right
    Cut offslope -18dB/oct. Level adjustment at -0.1dB steps (0 – -12dB)
    Cut off
    High Pass
    Select from 254 point
    Low Pass Select from 254 point
    Time Alignment Adjustable at 0.77cm(0.02ms) steps between 0.00cm
    (0.00ms) – 499.73cm (14.70ms)
    Frequency responce 20Hz – 20kHz (except 20kHz (-1.5dB) )
    Maximum output voltage / Inpedance 4.35Vrms / 200Ω
    Total harmonic distortion 0.005%(MM-1 or Optical)
    Input / Output Terminals Audio Input 2 digital (1 Mirror-Link (only MM-1), 1 optical)
    1 analog (RCA line 6ch multi-input support)
    Audio Output 3way 6ch RCA Line (TW, MW, SW)
    Video input 2 composite (1 Rear-view only)
    Video output 2 composite
    Multi-link connection Avalable 10 connect
    Signal to noise ratio 107dB
    Separation 100dB
    Maximum current consumption 1.3A (when connecting MM-1)
    Power source DC14.4V (11.0V- 16.0V allowable)
    Dark current Under 2mA
    Fuse 10A
    Size 240×187×43mm
    Weight 1.3kg
    Accessory Remote Control / Remote Eye

    To Top